1975 BELL AB 206B SOLD

AIRFRAME Total Time 12,237.2 Hours 23,031 Landings ENGINE Model: Allison 250-C20B s/n CAE833032 9,196.5 Hours SNEW 8,769 Landings 1,980 Hours SOH AVIONICS EQUIPMENT • Garmin 430 VHF/GPS/VOR ILS • King KY 196A VHF w/8.33 Spacing • Transponder • Brite Saver • High Landing Gear – EU OPS Compliant INTERIOR EXTERIOR • 4+1 passenger interior is completed in Caramel leather, with custom made black carpet. New, 2022 by R-BELL Paris le Bourget • Gray Exterior with white accents. New, 2022 by TitoDeco STATUS PROGRAM • 1200 Hr Inspection – Airframe: 176 Hours • 1500 Hr Inspection – Airframe: 1,096 Hours • 3000 Hr Inspection – Airframe: 1,819 Hours • Retention Strap and PIN: 754 Hours • Freewheel Assy Clutch Assy: 1,305 Hours • T/r Toke Assy: 3,118 Hours • T/+ Driveshaft: 2,517 Hours • T/r Gearbox: 1: 819 Hours – T/r Blades: 2,112 Hours • T/r Hub Assy: 716 Hours – M/r Blades x 2 : 2,202 Hours • M/r Hub: 176 Hours – M/r Latch Bolt: 1,819 Hours • M/r Mast Assy: 517 Hours • Fiting Retention Straps: 754 Hours • M/r Transmission Assy: 1,096 hours • MRH Grip: 2,739 Hours – MRH Trunnion: 1,918 Hours • M/r S/P Collective Lever: 2,593 Hours • M/r S/P Sleeve Assy: 4,606 Hours • Swashplate Support Assy: 4,132 • Starter Generator: 218 hours • Collective Idler Link: 3,796 Hours • Lower Collective Tube: 2,598 Hours • Hyd Pump: 2,627 – Hyd Servo Actuators x3: 2,627 Hours • AD 2004-0009 R2 (Tuyauteries): 0 Hours • T/r Rotor Trunnion: 3,117 Hours • Servo Actuator Support: 12,175 Hours • MAST: 6,714 Hours – Main DriveShaft: 7,322 Hours • Engine – OH: 1,918 Hours – Insp 1,750 Hours – HMI: 168 Hours • Compresor Case Insp HMI: 1,128 Hours • Compr. Assy. OH: 0 Hours • FCU: 0 Hours • Fuel Pump OH: 0 Hours • Bleed Valve: 1,098 Hours – Compressor Impeller: 1,574 Hours • Turbine Wheel No. 1 2: 716 Hours • Turbine Wheel No. 3: 2,924 Hours • Turbine Wheel No. 4: 3,057 Hours • Gas Producter Turbine Tie Bolt: 0 Hours • Fuel Nozzle: 2,153 Hours – Power Turbine Governor (bend): 0 Hours • Stage Wheel 1 to 6: 1,117 Hours – Tie Bolt 1,117 Hours • Coupling Adapter: 1,117 Hours – Gear Box: 316 Hours • Inspection 24- Mon – Bolt done 05/09/20 • MRH Retention Strap – Done 27/05/22 • Skidtube – 6 Months – 100 h – done 06/01/21 • M/r Mast Assy Inspection done 06/01/21 • CB Engine Hoses – 100h – 12 months – done 10/21