2023 Atec 321 Faeta

ATEC 321 FAETA NG is the “next generation” of ultralight aircraft. Taking advantage of our long-term experience and getting inspired by new ideas and experience of our customers, we designed and produced the most advanced aircraft established on the conception of original Faeta. The main noticeable difference between the original Faeta and Faeta NG is tail planes arrangement. Tail planes of the NG are designed in classical cross-shaped configuration. Also the shape of the dashboard is slightly modified to be able to accommodate also instruments of larger size. The instrumental board with 3D effect is made of titanium composite. So we created the combination of the latest design trends and technologies, aerodynamic purity, high performance and mainly of the safety. In addition, we focused on fashionable look of the airframe highlighted by its specific elegant curves. The Faeta NG is certified in the UL category up to 600 kg MTOW and LSA category. Such weight limit allows us to increase a comfort of the crew. The aircraft is equipped with the system of electric „smart flaps“ and optionally by the heating of seats. Spacious, fully upholstered, well ventilated and heated cockpit provides a good view out. Seats and pedals are adjustable. A load capacity of well reachable luggage compartment is 20 kg. To improve overall design quality of both the interior and exterior we use our 3D printer, which enables us effective production of small parts of suitable material to fit with our need. Faeta NG is now fitted with more than hundred various printed parts like bushings, covers, holders and other gadgets like e.g. drink bottle holder inbuilt in the central tunnel. Carbon composite airframe is standardly made of aviation certified carbon twill of the highest quality. Thanks to our own original production technology, we are able to assure high strength of the construction while keeping its low weight. The aircraft does not get any flutter up to the maximal calculated speed of 550 km/h. Aerodynamically pure design allows Faeta to reach perfect flight characteristics exceptional within its category. The aircraft is manoeuvrable, but stable and with immediate reactions of controls from its max. speed of 272 km/h (148 kt) until its extremely low stall speed of 56 km/h (30 kt). The Faeta NG, same as other ATEC aircraft, is the best option for touring, daily flights and also for training. Its flight characteristics help to ensure safe operation, comfortable travels, low consumption (8-12 L/h) and so economical operation and long flight range. Basic characteristics Specification (MTOW 600 kg) Wing span 9,6 m Length 6,25 m Height 2,1 m Wing area 10,1 m2 Tail span 2,4 m Wheel spacing 2,0 m Empty weight 320 kg Max. take-off weight 600 kg Fuel capacity 2 x 50 L Max. load in luggage compartment 20 kg Performance (MTOW 600 Kg, Rotax 912 iS 100HP) Cruising speed VC 242 km/h / 131 kt Never exceed speed VNE 272 km/h / 148 kt Stall speed (flaps extended) VS0 56 km/h / 30 kt Stall speed (flaps retracted) VS1 75 km/h / 40 kt Rate of climb 7,5 m/s / 1476 ft/min. G-load limit +4 / -2 g Flight range 2000 km Consumption (180/245 km/h) 9/14 L/h